Intel 板载网卡驱动2.0.0 支持众多型号

最新的英特尔板载网卡局域网驱动程序，为最新的硬件上提供最佳的性能和稳定性。目前支持的型号也是挺多的，下面看一下有没有你的型号？这个跟前面一片的驱动有点类似好像是一个人开发的，特性支持TCP，UDP、IPv4校验和卸载（收发），支持TCP／IPv6和UDP校验和卸载/ IPv6。利用该芯片的分段卸载（TSO）以IPv4和IPv6功能来减少CPU负载同时发送大量的数据。全面优化对 Mountain Lion, Mavericks and Yosemite (64bit architecture)的支持。具体的看下面的驱动特性吧！

驱动支持

 Series

• 82578LM
• 82578LC
• 82578DM
• 82578DC
• 6 and 7 Series
• 82579LM
• 82579V

8 and 9 Series

• I217LM
• I217V
• I218LM
• I218V
• I218LM2
• I218V2
• I218LM3

驱动特性

• Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission.
• No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer.
• TCP, UDP and IPv4 checksum offload (receive and transmit).
• Support for TCP/IPv6 and UDP/IPv6 checksum offload.
• Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data.
• Fully optimized for Yosemite and Mavericks (64bit architecture) but should work with Mountain Lion and Lion too, provided you build from source with the 10.8 or 10.7 SDK.
• Support for Energy Efficient Ethernet (EEE).
• VLAN support is implemented but untested as I have no need for it.
• The driver is published under GPLv2.

使用方法

1. 删除掉 /S/L/E 的 AppleIntelE1000e.kext.
2. 刷新系统缓存。
3. 打开系统偏好和删除相应的网络接口上，比如en0。
4. 重启电脑！
5. 利用Kext Wizard安装新的驱动程序并重新创建内核缓存。
6. 重启电脑
7. 打开系统偏好设置，选择网络并检查新的网络接口已创建的自动或手动创建它。